Haitian Banner 1170 100-01

Tags

SIG11056 Online Banner 368 150px RZ

REPbanniere smartmolding 368x15px

NET AnzOnline ELIOS-PAC ENm2 368x240

Shows
16. - 20. October 2018
Fakuma
Friedrichshafen, Germany
13. - 16. November 2018
formnext
Frankfurt am Main, Germany
05. - 07. December 2018
Plastic Japan
Chiba, Japan
Have some relevant information to share? Send a message to info@smart-molding.com — we are always happy to discuss!

KOPLAS-2019 Web banner 368x90 Eng

AOG19-368x90px-eng

rosmould368x90-eng

WITTMANN introduces new beside-the-press granulator

News 12.07.2016

1

G-Max 12 beside-the-press granulator.

The G-Max 12 granulator is a conventional beside-the-press granulator for the grinding of soft to middle hard engineering resins. This granulator is specifically designed for the inline-recycling of sprues from injection molding machines with clamping forces of 90 tons or less.

The G-Max 12 is especially compact, energy saving, and is equipped with a unique cutting chamber damper to significantly reduce noise.

The G-Max 12 uses a 1.5 kW IE3 premium efficiency motor, thus achieving significant energy savings. It has a staggered rotor consisting of 3 × 4 knives. The cutting chamber has dimensions of 198 × 169 mm. Depending on the type of material, the throughput can reach 50 kg/hr.

WITTMANN presents an entirely new concept with this granulator: A remote control replaces the conventional electrical control device. This new concept allows for standard functions that are not available with conventional design.

2

G-Max 12 within the protective housing of a working cell.

For example, the control device has an hour counter with digits display. An interface enables communication with the injection molding machine. As an option, a special shutdown-function is available: When the IMM is “off”, the granulator stops automatically. Again, this helps to save energy. There are two different positions of the control on the granulator to choose. This makes it much easier for the operator to supervise the grinding process.
The control’s connecting cable to the granulator has a length of three meters, allowing the control of the granulator from the outside of a protective housing. In contrast to the respective competitive products, WITTMANN is offering this as part of the granulator’s standard equipment.

All WITTMANN products are equipped with components of the highest quality, including the new G-Max 12. The material hopper and the 10 l regrind bin are made of stainless steel. The G-Max 12 has a screen with conical shaped holes as a standard feature. This makes it easier for soft tacky regrind to pass through the screen. This also helps to minimize screen hole plugging. Cleaning is made very easy, as operators can open the cutting chamber with a complete top access.

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.