GIF smart molding 100px

LATEST ISSUE
Tags
Shows
23. - 26. April 2024
Chinaplas
Shanghai, China
06. - 10. May 2024
NPE
Orlando, USA
15. - 19. October 2024
Fakuma
Friedrichshafen, Germany
Have some relevant information to share? Send a message to info@smart-molding.com — we are always happy to discuss!

CPS24 ICL SmartMolding 368x90px EN

SmartMoldingBanner A2 768x90 MarchApril min

Логотип сайта
Focus on new mobility and the substitution of polyamide 66

Focus on new mobility and the substitution of polyamide 66

News 21.03.2019

“High-Tech Thermoplastics for Future Mobility”: This is the slogan under which the High Performance Materials (HPM) business unit of the specialty chemicals company LANXESS will be showcasing at the VDI Congress “Plastics in Automotive Engineering” in Mannheim. “Our focus this year is on new applications in electromobility and cost-effective alternatives to polyamide 66 compounds. We are also focusing on lightweight design with continuous-fiber-reinforced thermoplastic composites and new solutions such as hollow-profile hybrid technology,” says Dr. Martin Wanders, Head of Global Application Development in HPM.

Electromobility – growing market
LANXESS set up the “e-Powertrain team” in response to the tremendous application potential of its polyamides and polyesters in the market for forms of new mobility. The team helps customers from the international automotive industry to choose tailor-made application-specific materials for electric vehicles. “We also support our partners throughout the entire development chain for their components, for example with engineering services for the component design like moldflow calculations, structure simulations and tests on finished parts,” says Julian Haspel, who heads the global “e-Powertrain” team.

csm LAN jun2018 bauteilePruefung 11 Lowres 77445c87f8

LANXESS supports customers worldwide in all phases of plastic component development with its tailored HiAnt services. These include, for example, tensile tests to determine material data.

LANXESS sees a variety of important applications for its thermoplastics in the field of electromobility, including charging systems, inverters, electric motors, auxiliary systems (e.g. cooling pumps) and battery elements. Potential battery applications include cell holders, spacers, covers, module carriers and housing parts. Haspel: “Our thermoplastics are in many cases an alternative to conventional materials such as die-cast metals, for example in crash-relevant structural components of the battery. But there are also entirely new potential applications, for example with our electrically insulating but thermally conductive compounds.”

Support for substituting polyamide 66
LANXESS has recently observed increasing demand – mainly from the automotive industry – for alternatives to polyamide 66 due to the limited primary product capacities for this thermoplastic, which have led to supply bottlenecks and major price increases for compounds. “We are helping our customers to find alternative materials to secure a reliable and cost-effective supply and to minimize the technical risks involved in switching over to a new material. Our services include everything from innovative alternative materials and extensive service in aspects ranging from material data and application support to technical production support,” says Tim Albert, who heads a corresponding international team at HPM.

High-modulus polyamides for structural components
One example of a material innovation where polyamide 66 can in many cases be replaced is the new Durethan P (performance) polyamide 6 series. The products are extremely resistant to pulsating loads, even at the high temperatures inside the engine compartment. Their mechanical properties are similar to those of polyamide 66. “The substitution can usually be made using compounds with the same glass fiber content, which means that the components are not any heavier,” says Albert. At the VDI Congress, HPM will be showcasing from its product range two new examples featuring 50% and 60% glass-fiber reinforcement. Their high strength and rigidity make them ideal for the lightweight construction of battery components or other parts such as oil filter modules, chassis bearings, damper pistons and seats.

The future of the European automotive and plastics industries
LANXESS is also playing an active role in the congress program. Dr. Axel Tuchlenski, for example, who heads global product and application development at HPM, is one of the experts appearing in the panel discussion entitled “Innovations in the Automotive and Plastics Industry: Is Europe Running out of Time?”. The event will take place on April 3, 2019

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.