LATEST ISSUE

SIGMA Engineering Smart Molding Banner 368x150px

Tags
Shows
13. - 16. April 2021
Chinaplas
Shenzhen, China
15. - 17. June 2021
Rosmould
Moscow, Russia
13. - 16. September 2021
koplas
Seoul, Korea
Have some relevant information to share? Send a message to info@smart-molding.com — we are always happy to discuss!

RM21 RP21 EN 368x90

DESMA SMP Banner 768x90

Логотип сайта
Material campaign continues with new photopolymers

Material campaign continues with new photopolymers

News 30.04.2021

Evonik has developed two photopolymers for industrial 3D printing applications and introduces them under the brand names INFINAM® TI 3100 L and INFINAM® ST 6100 L. The two ready-to-use materials were conceptualized and invented in Evonik’s research hub in Singapore. They mark the start of a new product line of polymer resins suitable for use in common VAT polymerization technologies such as SLA or DLP. The specialty chemicals company will present the new products for the first time at the TCT Asia trade show from May 26-28 in Shanghai.

301516 desktop

Evonik launches new product line of photopolymers for 3D printing

"With the new product line, we are entering the market-relevant photopolymer technology stream, strengthening our long-term market position as materials experts for all major polymer-based 3D printing technologies," says Dr. Dominic Störkle, head of the Additive Manufacturing Innovation Growth Field at Evonik. "With the new ready-to-use formulations, we are also continuing our materials campaign and driving industrial-scale 3D printing as manufacturing technology along the entire value chain."

Starting signal for a new photopolymer product line
The first high-performance material from Evonik's photopolymer product family leads to high toughness and impact-resistant 3D parts. The combination of properties makes INFINAM® TI 3100 L the new standard for additive manufacturing of industrial components using VAT polymerization technologies such as SLA and DLP. The impact resistance measured on printed components is 30 J/m3 with a high elongation at break of 120 percent. The new material can therefore withstand strong impact or permanent mechanical effects such as pressing or impact. The range of possible applications extends from industrial to automotive parts and individual applications in the consumer goods sector, which, in addition to design-free forms, require strong mechanical loads in object use.

301520 desktop

INFINAM® TI 3100 L - the first high-performance material of Evonik's photopolymer product family is a high toughness light-curing resin

The second formulation is setting-up a new benchmark in high strength photo-resin category with a combined tensile strength of 89 MPa, flexural stress of 145 MPa and HDT of 120 °C, which fills the material gap in ultra-high strength photopolymers. These special material properties make INFINAM® ST 6100 L the material of choice for applications which need high temperature resistance combined with high mechanical strength.

"With INFINAM® TI 3100 L and INFINAM® ST 6100 L we have brought the group’s first photopolymer materials for additive manufacturing to market maturity. In doing so, we draw on the enormous chemical expertise of our researchers in component development and formulation. On this basis, we can offer the market a unique product with excellent properties and help our customers to conquer new application areas," says Dr. Rainer Hahn, Head of Evonik’s photopolymer market segment in the Additive Manufacturing Innovation Growth Field.

INFINAM® Photopolymers for SLA and DLP
The new line of photopolymers are ready-to-use, high-performance formulations that can be processed on a wide range of common SLA and DLP machines commercially available on the market.

Evonik is bundling its expertise in 3D printing in the group’s additive manufacturing innovation growth field, which is driven by the research team in Singapore. The strategic focus here is on the development and manufacturing "ready-to-use" high-performance materials along common technologies. In this context, Evonik recently reorganized its product range of ready-to-use 3D printing materials under the new INFINAM® brand. Collaborations with customers and partners are an important innovation driver.

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.