GIF smart molding 100px

23. - 26. April 2024
Shanghai, China
06. - 10. May 2024
Orlando, USA
15. - 19. October 2024
Friedrichshafen, Germany
Have some relevant information to share? Send a message to — we are always happy to discuss!

CPS24 ICL SmartMolding 368x90px EN

Moritech banner

Логотип сайта
Bottle design 4 sustainability

Bottle design 4 sustainability


The availability of advanced instrumentation and pilot lines means that every solution developed by the Laboratory, together with customers, can be tested in the field to validate the performance of the cap, preform and blow moulded container. A knowledge of materials and technological expertise that makes the difference, with innovative projects implemented all over the world and for key players in the industry

Functional and elegant design, lightweight and sustainable. With an increasing proportion – which is growing in Europe because of regulations – of recycled resin. This is modern beverage packaging; an approach that over the past few years has revolutionised the sector, with SACMI at the forefront thanks to its facilities, skills and ability to develop a complete range from product to technology, from preform development to the full, capped and labelled containers.


The technological challenge
The lightweighting of containers and the increasing use of recycled resins (especially rPET) pose significant technological challenges. The first is to create a technical-structural design that brings the characteristics of the lightweight bottle as close as possible to the required functional specifications and which provides a traditional consumption experience for the customer. The second involves the process, in terms of the increasing amount of recyclate in the mixtures, which compared to a virgin resin, is highly variable in terms of quality, viscosity, etc.

For more than 10 years, SACMI has been investing in developing blow-moulding technology. Robust, reliable, high-performance machines ready to take on the challenge of new lightweight containers and/or those made with up to 100% recycled material. SACMI has tested the various solutions in the current supply chain, first on still water containers and then on CSD containers, which is equally challenging due to the high quality and sealing performance required for carbonated beverage containers.

The proposal
Resin testing and analysis, advanced technologies for both preform production (IPS, injection preform system) and blow moulding (SBF rotary blow moulding machines also available in combination with the filling line), allow SACMI to work on the design, optimise it according to the customer's needs and to develop ad hoc solutions based on commercial requirements. This ability also delivers advantages in terms of time-to-market, with the possibility of fast prototype development (also using new 3D moulding techniques) and testing the prototypes of the blow moulded container on the actual line. Carrying out comprehensive trials and tests at this point minimises the risk of functional issues and faults at a later stage, such as after blowing, and having produced entire batches of incorrect bottles.

SACMI is also the first company on the market to have integrated the PVS156 intensive quality control system, produced by SACMI Computer Vision, directly into its preform press, to provide an additional guarantee of perfect production results and improved process control. SACMI's research into moulds and blow moulding tools has resulted in the development of low-pressure bottoms. A patented SACMI system that drastically reduces the consumption of compressed air.

Design from a lightweight (and recycling) perspective
The key aspect of the offer, which SACMI makes available to customers through the new SACMI Beverage Packaging Centre – which in turn makes use of the skills of the Group's Beverage and Rigid Packaging Laboratories – was identifying a specific ‘design key’ to create lighter bottle designs while maintaining both a high aesthetics and performance characteristics.

The latter is an integrated approach that includes the configuration of the neck and cap, and the structure of the bottle itself once it has been blown, right up to the design of the moulds, which is also carried out using advanced simulation techniques such as finite element analysis (FEM analysis). In all cases, the result is not limited to a paper copy; it is prototyped and industrially tested either using test benches and simulators or using anthropomorphic robots that simulate the behaviour of the actual machine.

The PET-In-Box Opportunity
Research and development into new solutions from a technological point of view, which are capable of intercepting new market trends is an important part of SACMI Beverage's activities. One interesting proposal is the development of PET-In-Box, i.e. the replacement of the traditional BIB 'bag', which is difficult to recycle, with a PET bottle blown from a super-light preform.

The advantage is twofold, a net saving on material which – taking the standard 5, 8 or 10 litre formats as an example – is more than 50% (from 125-130 g to just 69 g). The container can easily be recycled in the traditional PET chain. A high-performance solution in terms of sustainability that has already attracted the attention of major customers.

It is important to note that the application developed does not require the production of special preforms: in fact, the lightest preform already available on the market was used to make a standard 41/48 mm neck, with the possibility of improving weight reduction even further depending on the application requested and the availability of ultra-light preforms.

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.