Haitian Banner 1170 100-01


SIG11056 Online Banner 368 150px RZ

REPbanniere smartmolding 368x15px

02. - 05. April 2019
Mexico city, Mexico
21. - 24. May 2019
Guangzhou, China
22. - 24. May 2019
Plastic Expo
Osaka, Japan
Have some relevant information to share? Send a message to info@smart-molding.com — we are always happy to discuss!

CPS19 smart molding EN 368x90

FISA 170913 banner01 moulesGB

Логотип сайта
Successful relocation

Successful relocation

News 08.11.2018

INCOE Corporation USA has recently announced the successful move of three facilities in the Metro Detroit area into their new 138,000 ft2 (12,820 m2) Global Headquarters. Formerly headquartered in Troy, Michigan, the new facility is located within Oakland Technology Park in Auburn Hills, Michigan.

INCOE Exterior Web

INCOE’s new Global Headquarters in Auburn Hills, Michigan

Bob Fons, Plant Manager for INCOE commented, “We planned the move in as much detail as we could in the time that we had. We executed the plan successfully, and over the four week move of manufacturing and office equipment we were always operational in some capacity. Hot runner systems were continually being designed, manufactured, inspected and assembled throughout the entire moving process.”

Developed by General Development Company, the $20+ million state-of-the-art facility is designed to improve operational efficiency within the organization by situating dependent processes in closer proximity to one another. Within the office area, open collaboration spaces along high traffic pathways have been created to provide casual meeting spaces. The 85,000 ft2 (7,900 m2) manufacturing area was designed around a central space containing Quality Control, Inventory Management and shop offices to maximize process flow.

Ghafari Associates was the project consultant for INCOE during layout and build of the new global headquarters facility. Ghafari helped customize the manufacturing layout for INCOE’s specific needs, and also provided interior office design recommendations. Courtney Seres, VP Corporate Administration and building project manager for INCOE said, “We couldn’t have done this without the expertise of Ghafari. We know hot runner systems but we’re not facility experts. We know what we wanted for our employee experience inside the new building, and Ghafari helped realize these expectations with guidance on best practices for current facility trends. The results are stunning.”

INCOE Design Web

INCOE’s new Global Headquarters – Design Department

The new global headquarters project reached its completion during the year that INCOE celebrates their 60th anniversary. INCOE was founded in 1958 by Alex Seres, who developed and patented the first commercial hot runner nozzle. Under the second-generation leadership of former President and CEO, Rick Seres, the company later expanded to become a global hot runner system solutions provider. Complementing the new Auburn Hills global headquarters, INCOE now operates manufacturing and sales facilities in Germany, China, Brazil and Singapore, with supporting operations located in Queretaro Mexico, Dongguan China, and Hong Kong. INCOE’s total global network of sales and service has grown to reach over 45 countries.

Current third-generation President and CEO Eric Seres Jr. said, “It all goes back to the beginning; how we conduct ourselves with integrity, how we’re passionate about the success of our customers, and how we treat our employees fairly and with respect – this way of operating has been part of our culture since the beginning. The result of that culture is represented in our new global headquarters facility. With this large investment and the operational efficiency gains we expect to realize, we’ll be able to serve our customers in an even greater capacity for years to come.”

Screenshot 1

INCOE’s new Global Headquarters – Manufacturing, Bay 2 of 4

In keeping with a culture built on customer focus, a section of the facility is reserved as a customer knowledge center, including a 2,400 ft2 (220 m2) molding laboratory. Within this area, INCOE and their industry partners will hold large training and informational seminars which will also include hands-on training inside the molding lab.

The molding lab is expected to be fully operational by the end of the year with 3 state-of-the-art KraussMaffei injection molding machines.

As INCOE continues to settle into their new facility, follow INCOE on social media for updates on facility features and highlights over the coming weeks.


Since 1958, INCOE has engineered productivity built hot runner systems starting with their original patented design of the first commercial hot runner nozzle. Today, a wide range of systems, nozzles and manifolds, pre-wired and leak-proof Seal-Fit™ systems, complete hot halves and advanced control technologies provide optimized processing advantages suitable for appliances, automotive, caps, closures, electronics, medical disposables, medical devices, packaging, pharmaceutical and technical molding applications. A network of representatives in over 45 countries is supported by INCOE facilities located in North America, Europe, Asia and South America. Wherever your molding operation is, INCOE can support your business with complete hot runner system solutions engineered for your application. INCOE Hot Runner Systems... Your Partner for Successful Injection Molding.

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.