SIG11056 Online Banner 368 150px RZ

REPbanniere smartmolding 368x15px

10. - 12. November 2020
Frankfurt am Main, Germany
02. - 04. December 2020
Plastic Expo
Tokyo, Japan
26. - 29. January 2021
Moscow, Russia
Have some relevant information to share? Send a message to — we are always happy to discuss!

CPS21 SmartMolding 368x90 EN GN


Логотип сайта
New hot runner systems with uncooled cylinder

New hot runner systems with uncooled cylinder

News 18.04.2019

HRScool is an innovative solution for hot runner injection molding, in which the otherwise necessary water cooling of the corresponding actuator can be dispensed with. The key to this is the twice optimized temperature management system, in which insulating supporting columns with a minimal contact surface reduce the input of heat from the hot runner to the cylinder housing. This, in turn, is provided with a cover with a large, flat surface made of thermally conductive material. The integrated telescopic design enables maximum heat dissipation from the cylinder to the cold platen.

new hrscool hrsflow

By using the HRScool technology in hot runner systems, separate cooling of the cylinders becomes superfluous in a wide variety of applications

The many advantages derived from using HRScool come about because there is no longer any need for elements such as cooling lines, channels and connections that are otherwise necessary for active cooling. Consequently, assembly and handling costs are reduced. Machine availability increases because problems with clogged cooling circuits and the degradation of hydraulic fluids can no longer occur, thereby lowering operating costs.

Furthermore, the compact design of systems with HRScool takes up less space in the molding tool. Because this results in an optimum uniform temperature distribution along the entire hot runner system, higher molding quality can be achieved and, thanks to the bayonet coupling, the valve pin can remain in the hot runner system when cylinders have to be removed.

NPE 3D 768x90 v4

Our website makes use of cookies to ensure we give you the best experience on our website.
By continuing browsing on our website you give your consent to our use of cookies.